The Static Load Tester (SLT) automatically obtains and records reliable readings at programmable load intervals during a static load test.
The Pile Driving Monitor (PDM) uses optically safe infrared lasers to track a disposable reflective sticker adhered directly to the pile.
The Pile Driving Analyzer (PDA) system is the most widely employed system for Dynamic Load Testing and Pile Driving Monitoring in the world. PDA tests assess the capacity of several piles in a single day.
Length Inductive Test Equipment (LITE) evaluates the length of existing steel piles (Steel Sheet Piles, H-piles, Pipe piles, Cased Drilled Shafts, and highly reinforced Drilled Shafts) using the inductive field method.
GRLWEAP is a one-dimensional Wave Equation Analysis program that simulates the pile response to pile driving equipment.
E-Saximeter registers all relevant pile driving parameters. It calculates the hammer operating rate in blows per minute and helps the piling inspector create a pile driving log.
CAPWAP® (Case Pile Wave Analysis Program) is the industry state-of-practice tool to establish the pile capacity, and estimates total bearing capacity of a pile or shaft, as well as resistance distribution along the shaft and at the toe.